|
Roll
& Grip make Dual Action Hand Spray Gun DJ-10 is ideal for spraying
of die coats on forging, die casting and rubber moulding dies where
simultaneous spraying of both the dies is desired. The spray gun has
two hose connectors for supply of air and die-coat. It has a liquid
control valve on the upper side of the spray gun for controlling
quantity of die coat being sprayed. The long aluminium pipe provides
easy access to the all parts of die from safe working distance. This
gun comes with straight aluminium pipe with nozzle at the end. The
spray nozzle has two orifices on opposite faces and provide diagonally
opposite spray. Since this gun provides spray on diagonally opposite
sides it is very effective in spraying both the dies simultaneously
without twisting the spray gun and ensures proper reach and application
of die-coat with most economical hand movements.
The
spray gun works in two steps. Partially pressing the handle releases
air blast which is for blowing scales and cleaning the die. Pressing
the handle completely gives out spray of die coat.
The air is needed at pressure between 3 to 5 Kg/cm2. The die coat can be supplied using gravity feed arrangement or pressure feed container.
The
Dual Action Hand Spray Gun DJ-10 comes with different lengths of
aluminium straight pipe to suit the requirement. The length of the
aluminium pipe should be selected considering the size of machine, size
of die and the distance between operator and the die.
The straight pipe helps in easily cleaning and spraying both the top
and bottom die simultaneously. With reduced air blast provided by this
gun both the top and bottom dies can be easily sprayed where the die
opening is small.
Technical Data:
| Air Pressure |
2 to 4 kg/cm |
|
Liquid Pressure |
Gravity feed or from
pressure Tank
@ 1 to 2 kg/cm |
|
Length |
480 mm standard overall length with 300 mm extension tube |
Weight
|
600 gm |
|
